Description
Compact Design, Wide Use: Mini size of the instant water heater, which can be 360 degrees installed to meet your various needs such as used in bathroom, public restroom, RV, hair salon, bathroom shower, kitchen under sink, over sink, for fruit/hand/face/dishwashing, etc.
Digital LED Display and Remote Control: Features an easy-to-read digital LED display and enhanced adjustable thermostat for precise temperature control. The included wireless remote allows you to change the temperature within a 3M long distance.
Multiple Protection Ensure Your Safety- Built-in SMART SELF ADJUSTMENT Chip,3s to heat, provide thermostatic water. Dry combustion, flame failure device, anti-freezing protection, over heating protection to ensure your safety. Fully automatic temperature controls with an energy saving mode and child lock technology.
Applied with a 3 power (6.5KW 5.5KW 4.5KW) heating system, the electric tankless water heater supplies instant & endless hot water from 25C to 55C.
Features:
-
Mini instant hot water heater system for kitchen bathroom
-
Mini elegant appearance, fashionable and practical with a reasonable cost
-
Magnetized water, instant hot, just 3-5 seconds water is hot, no need to wait.
-
Constant temperature, maintain the most comfortable water temp for you
-
Energy efficient water heater - save on electricity costs, without radiation, pollution-free, no exhaust gas.
- Advanced safety protection - Protection against dry heating and overheating, prevent electric leakage, with auto malfunction checking.
Specifications:
Rated Voltage: 220V-240V
Rated Power and Current: 4.5KW(19A), 5.5KW(23A), 6.5KW(27A)
Mini Flowrate to Activate: 0.475GPM(1.8L/minï¼_
Waterproof Level: IPX4
Copper Wire Requirement: 12AWG
Pipes Fittings: G1/2"
Circuit Breaker: 1 x 1-Pole 32AMP
Product Size: 24x13x7.6cm
Content:
1 x Instant Water Heater
1 x Remote Control(1.5V AAA battery Not include)
1 x User Manual
Reminders:
• The output water temperature from the heater is subject to the volume of water flow and the temperature of the inlet water. The initial temperature of the water entering the heater will affect how quickly the water can be heated. The higher the inlet temperature, the less work the heater has to do to reach the desired output temperature.Due to variations in water temperature and flow rate in different regions, the output water temperature might vary.
When the water flow rate is at 3L, a 6500W water heater can raise the water temperature by 19.5℃. E.g. if the local water temperature is 18℃, 18 + 19.5 equals 37.5℃.
When the water flow rate of 2L, a 6500W water heater can raise the water temperature by 22℃. E.g. if a local water temperature of 18℃, 18 + 22 equals 40℃.
When the water flow rate of 3L, for every 1000W, the temperature increase is +3℃. With a 5500W heater at 220V, the temperature increase would be +5.53℃, (5500W / 1000W) * 3℃ = 16.5℃.
When the water flow rate of 3L, for every 1000W, the temperature increase is +3℃. However, at 110V, the power is only half, which is 2250W. Therefore, the temperature increase would be to 3℃, the temperature increase would be around 8℃.
• If the temperature in your area is below 10 degrees or even colder, while you expect quick heating to a higher temperature, this product might not meet your needs.Please choose a heater with a high power rating between 15-20KW.
• The heater must be installed vertically.
• Before using the heater, please open the tap first, then switch on the power to avoid any damage.
• Before using the heater, please make sure to reach the required water pressure to operate.
• Do not modify the heater without permission and professional support!
• There may be some differences between the displayed temperature and the actual water temperature.
Warning:
• Do not immediately test it on your hand upon receiving it.
• Please make sure the heater installed by a qualified electrician, and tested after proper installation to avoid any hazards.
• Please follow the installation instructions provided.
• The normal operation of the heater requires that the power supply must meet the heater's power requirements.
